Knot Burr Puzzle

My newest project, the 3 piece knot burr puzzle. 3 pieces, one maple, one cherry, and one walnut. Carefully sanded and finished with Danish Oil.

Following a pattern (of course) I cut out the pieces needed, glued them up into the 3 shapes. Table saw, radial arm saw and planer were all needed.

Careful sanding is next, and a test fit, just to be sure. Then comes the finish, we chose Watco Danish Oil, other finishes can be applied by request.

 

These will be made to order, if you are interested in one (or more) let me know!

Thanks for stopping by!

Leave a Reply